@article {N{\'u}{\~n}ez-Corn{\'u}201659,
	title = {{Geophysical studies across rivera plate and jalisco block, Mexico: Tsujal project}},
	journal = {Seismological Research Letters},
	volume = {87},
	number = {1},
	year = {2016},
	pages = {59{\textendash}72},
	abstract = {In the spring of 2014, an onshore-offshore geophysical experiment ("Crustal Characterization of the Rivera plate-Jalisco Block Boundary and Its Implications for Seismic and Tsunami Hazard Assessment") was carried out in the frame of theTsuJal project to define the crustal architecture of the western Mexican active margin and identify potential structural sources that can trigger earthquakes and tsunamis at the convergence between the Rivera plate (RP) and the Jalisco Block (JB) within the North American plate. In this work, we present the preliminary results about bathymetric, structural geology, and wide-angle seismic data of the southern coast of Bah{\'\i}a de Banderas. These data indicate the slab thickness in this area is about 10 km and presents a dip angle of about 8. Continental crustal thickness below Puerto Vallarta is about 20 km, but no evidences of continental Moho and clear subduction features (trench, accretionary prism) are observed. Nevertheless, this model supports the hypothesis that the region of Bah{\'\i}a de Banderas is under strong crustal stresses generating structural lineaments with the same trends offshore and inland due to the convergence of the RP against the JB. Most of the seismicity reported can be associated with the main structural lineaments. Moreover, the Banderas Canyon (BC) is apparently in an eastward opening process, which seems to continue through the Rio Pitillal river valley; no seismic or morphological evidences were found to suggest the BC is a continuation of the Vallarta graben. Offshore, the Sierra de Cleofas, located south of Mar{\'\i}a Cleofas Island, marks the limit between the RP and the JB along 100 km. It may be the result of the RP pushing against the JB establishing the beginning of the current subduction process, with associated seismic activity. If a subduction type earthquake occurs in this area, the associated magnitude will be about 7.5 and could have a tsunamigenic effect.},
	doi = {10.1785/0220150144},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84954306785\&partnerID=40\&md5=ad4bbdb5d2b001b4510745d3e92ea302},
	author = {N{\'u}{\~n}ez-Corn{\'u}, F J and C{\'o}rdoba, D and Da{\~n}obeitia, J J and Bandy, W L and Figueroa, M O and Bartolom{\'e}, R and N{\'u}{\~n}ez, D and Zamora-Camacho, A and Esp{\'\i}ndola, J M and Castell{\'o}n, A and Escudero, C R and Trejo-G{\'o}mez, E and De Jes{\'u}s Escalona-Alc{\'a}zar, F and Plascencia, C S and Alejandro Nava, F and Mortera, C}
}
@article {Biescas2016,
	title = {{Synthetic Modeling for an Acoustic Exploration System for Physical Oceanography}},
	journal = {Journal of Atmospheric and Oceanic Technology},
	volume = {33},
	number = {1},
	year = {2016},
	pages = {191{\textendash}200},
	publisher = {American Meteorological Society},
	abstract = {AbstractMarine multichannel seismic (MCS) data, used to obtain structural reflection images of the earth?s subsurface, can also be used in physical oceanography exploration. This method provides vertical and lateral resolutions of O(10?100) m, covering the existing observational gap in oceanic exploration. All MCS data used so far in physical oceanography studies have been acquired using conventional seismic instrumentation originally designed for geological exploration. This work presents the proof of concept of an alternative MCS system that is better adapted to physical oceanography and has two goals: 1) to have an environmentally low-impact acoustic source to minimize any potential disturbance to marine life and 2) to be light and portable, thus being installed on midsize oceanographic vessels. The synthetic experiments simulate the main variables of the source, shooting, and streamer involved in the MCS technique. The proposed system utilizes a 5-s-long exponential chirp source of 208 dB relative to 1 ?Pa at 1 m with a frequency content of 20?100 Hz and a relatively short 500-m-long streamer with 100 channels. This study exemplifies through numerical simulations that the 5-s-long chirp source can reduce the peak of the pressure signal by 26 dB with respect to equivalent air gun?based sources by spreading the energy in time, greatly reducing the impact to marine life. Additionally, the proposed system could be transported and installed in midsize oceanographic vessels, opening new horizons in acoustic oceanography research.},
	issn = {0739-0572},
	doi = {10.1175/JTECH-D-15-0137.1},
	url = {http://dx.doi.org/10.1175/JTECH-D-15-0137.1},
	author = {Biescas, Berta and Ruddick, Barry and Kormann, Jean and Sallares, Valenti and Nedimovi{\'c}, Mladen R and Carniel, Sandro}
}
@article {Hensen01042015,
	title = {{Strike-slip faults mediate the rise of crustal-derived fluids and mud volcanism in the deep sea}},
	journal = {Geology},
	volume = {43},
	number = {4},
	year = {2015},
	pages = {339{\textendash}342},
	abstract = {We report on newly discovered mud volcanoes located at \~{}4500 m water depth \~{}90 km west of the deformation front of the accretionary wedge of the Gulf of Cadiz, and thus outside of their typical geotectonic environment. Seismic data suggest that fluid flow is mediated by a >400-km-long strike-slip fault marking the transcurrent plate boundary between Africa and Eurasia. Geochemical data (Cl, B, Sr, 87Sr/86Sr, $δ$18O, $δ$D) reveal that fluids originate in oceanic crust older than 140 Ma. On their rise to the surface, these fluids receive strong geochemical signals from recrystallization of Upper Jurassic carbonates and clay-mineral dehydration in younger terrigeneous units. At present, reports of mud volcanoes in similar deep-sea settings are rare, but given that the large area of transform-type plate boundaries has been barely investigated, such pathways of fluid discharge may provide an important, yet unappreciated link between the deeply buried oceanic crust and the deep ocean.},
	doi = {10.1130/G36359.1},
	url = {http://geology.gsapubs.org/content/43/4/339.abstract},
	author = {Hensen, Christian and Scholz, Florian and Nuzzo, Marianne and Valadares, Vasco and Gr{\'a}cia, Eul{\`a}lia and Terrinha, Pedro and Liebetrau, Volker and Kaul, Norbert and Silva, Sonia and Mart{\'\i}nez-Loriente, Sara and Bartolom{\'e}, Rafael and Pi{\~n}ero, Elena and Magalh{\~a}es, Vitor H and Schmidt, Mark and Weise, Stephan M and Cunha, Marina and Hilario, Ana and Perea, Hector and Rovelli, Lorenzo and Lackschewitz, Klas}
}
@article {Papadopoulos2014,
	title = {{Historical and pre-historical tsunamis in the Mediterranean and its connected seas: Geological signatures, generation mechanisms and coastal impacts}},
	journal = {Marine Geology},
	volume = {354},
	year = {2014},
	pages = {81{\textendash}109},
	publisher = {Elsevier},
	abstract = {The origin of tsunamis in the Mediterranean region and its connected seas, including the Marmara Sea, the Black Sea and the SW Iberian Margin in the NE Atlantic Ocean, is reviewed within the geological and seismotectonic settings of the region. A variety of historical documentary sources combined with evidence from onshore and offshore geological signatures, geomorphological imprints, observations from selected coastal archeological sites, as well as instrumental records, eyewitnesses accounts and pictorial material, clearly indicate that tsunami sources both seismic and non-seismic (e.g. volcanism, landslides) can be found in all the seas of the region with a variable tsunamigenic potential. Local, regional and basin-wide tsunamis have been documented. An improved map of 22 main tsunamigenic zones and their relative potential for tsunami generation is presented. From west to east, the most important tsunamigenic zones are situated offshore SW Iberia, in the North Algerian margin, in the Tyrrhenian Calabria and Messina Straits, in the western and eastern segments of the Hellenic Arc, in the Corinth Gulf of Central Greece, in the Levantine Sea offshore the Dead Sea Transform Fault and in the eastern side of the Marmara Sea. Important historical examples, including destructive tsunamis associated with large earthquakes, are presented. The mean recurrence of strong tsunamis in the several basins varies greatly but the highest event frequency (1/96. years) is observed in the east Mediterranean basin. For most of the historical events it is still unclear which was the causative seismic source and if the tsunami was caused by co-seismic slip, by earthquake-triggered submarine landslides or by a combination of both mechanisms. In pre-historical times, submarine volcanic eruptions (i.e. caldera collapse, massive pyroclastic flows, volcanogenic landslides) and large submarine landslides caused important tsunamis although little is known about their source mechanisms. We conclude that further investigation of the tsunami generation mechanisms is of primary importance in the Mediterranean region. Inputs from tsunami numerical modeling as well as from empirical discrimination criteria for characterizing tsunami sources have been proved particularly effective for recent, well-documented, aseismic landslide tsunamis (e.g., 1963 Corinth Gulf, 1979 C{\^O}te d{\textquoteright}Azur, 1999 Izmit Bay, 2002 Stromboli volcano). Since the tsunami generation mechanisms are controlled by a variety of factors, and given that the knowledge of past tsunami activity is the cornerstone for undertaking tsunami risk mitigation action, future interdisciplinary research efforts on past tsunamis are needed. {\textcopyright} 2014 Elsevier B.V.},
	keywords = {Geological signatures, Historical tsunamis, Mediterranean region, Tsunami impact, Tsunami mechanisms},
	issn = {00253227},
	doi = {10.1016/j.margeo.2014.04.014},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84901663041\&partnerID=tZOtx3y1},
	author = {Papadopoulos, Gerassimos A. and Gr{\'a}cia, Eul{\`a}lia and Urgeles, Roger and Sallares, Valenti and De Martini, Paolo Marco and Pantosti, Daniela and Gonz{\'a}lez, Mauricio and Yalciner, Ahmet C. and Mascle, Jean and Sakellariou, Dimitris and Salamon, Amos and Tinti, Stefano and Karastathis, Vassilis and Fokaefs, Anna and Camerlenghi, Angelo and Novikova, Tatyana and Papageorgiou, Antonia}
}
@article {Neukirch2014,
	title = {{Nonstationary magnetotelluric data processing with instantaneous parameter}},
	journal = {Journal of Geophysical Research: Solid Earth},
	volume = {119},
	number = {3},
	year = {2014},
	pages = {1634{\textendash}1654},
	issn = {21699313},
	doi = {10.1002/2013JB010494},
	url = {http://doi.wiley.com/10.1002/2013JB010494},
	author = {Neukirch, M. and Garcia, X.}
}
@article {Biescas2014,
	title = {{Recovery of temperature, salinity, and potential density from ocean reflectivity}},
	journal = {Journal of Geophysical Research: Oceans},
	volume = {119},
	number = {5},
	year = {2014},
	pages = {3171{\textendash}3184},
	publisher = {Blackwell Publishing Ltd},
	abstract = {This work explores a method to recover temperature, salinity, and potential density of the ocean using acoustic reflectivity data and time and space coincident expendable bathythermographs (XBT). The acoustically derived (vertical frequency >10 Hz) and the XBT-derived (vertical frequency <10 Hz) impedances are summed in the time domain to form impedance profiles. Temperature (T) and salinity (S) are then calculated from impedance using the international thermodynamics equations of seawater (GSW TEOS-10) and an empirical T-S relation derived with neural networks; and finally potential density ($\rho$) is calculated from T and S. The main difference between this method and previous inversion works done from real multichannel seismic reflection (MCS) data recorded in the ocean, is that it inverts density and it does not consider this magnitude constant along the profile, either in vertical or lateral dimension. We successfully test this method on MCS data collected in the Gulf of Cadiz (NE Atlantic Ocean). T, S, and $\rho$ are inverted with accuracies of $δ$Tsd=0.1C, $δ$Ssd=0.09, and $δ$$\rho$sd=0.02kg/m 3. Inverted temperature anomalies reveal baroclinic thermohaline fronts with intrusions. The observations support a mix of thermohaline features created by both double-diffusive and isopycnal stirring mechanisms. Our results show that reflectivity is primarily caused by thermal gradients but acoustic reflectors are not isopycnal in all domains. Key Points Recovery of oceanic T, S, and potential density from acoustic reflectivity data Thermal anomalies observations at the Mediterranean tongue level Comparison between acoustic reflectors in the ocean and isopycnals {\textcopyright} 2014. American Geophysical Union. All Rights Reserved.},
	keywords = {low-frequency acoustic oceanography, ocean reflectivity, Seismic oceanography, thermohaline fronts, thermohaline intrusions},
	issn = {21699275},
	doi = {10.1002/2013JC009662},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84902770570\&partnerID=tZOtx3y1},
	author = {Biescas, Berta and Ruddick, Barry R. and Nedimovic, Mladen R. and Sallares, Valenti and Bornstein, Guillermo and Mojica, Jhon F.}
}
@conference {Garcia2013,
	title = {{ARMA 13-203 Revisiting Vertical Hydraulic Fracture Propagation Through Layered Formations {\textendash} A Numerical Evaluation}},
	booktitle = {47th US Rock Mechanics/Geomechanics Symposium},
	volume = {4},
	year = {2013},
	pages = {2501{\textendash}2511},
	abstract = {In the oil and gas industry, vertical growth/containment of fractures during hydraulic fracturing is of pivotal importance to the success of well stimulations. Experimental work have improved our understanding of the topic, but it is sometimes difficult to explore, in isolation, some of the multiple parameters involved in the problem. Analytical models cannot account for the whole complexity of the problem, and although numerical models are an alternative, they also come with their own benefits and drawbacks. Oversimplification, limitations on the size of the treatable systems, and erroneous/doubtful assumptions are sometimes drawbacks of numerical approaches. In this work, an effort is made to overcome some of these issues and present a numerical model which incorporates the physics of fracture growth and does not rely on prescribed constitute laws or continuum equations. The approach is based on the discrete element method (DEM) and accounts for the physics of fracture growth from basic principles. The model has the benefit of being a hybrid model that includes the fine-details of tip mechanics plus the large-scale effects of an arbitrarily large surrounding medium. This approach was used to study, in isolation, the influence of toughness contrast on the propagation mode of a fracture through an interface separating two formations. The model captured the local scale effects of the interaction of the tip of a vertical fracture approaching a horizontal fracture while still being computationally efficient. The results obtained indicate that when varying the single parameter of toughness contrast, four main propagation modes were observed for Mode I fractures: straight crossing across the interface between layers, arrest at the interface, propagation across the interface but with a T-shaped fracture, and reinitiation of the fracture with an offset (jog). Copyright 2013 ARMA, American Rock Mechanics Association.},
	isbn = {9781629931180},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84892878236\&partnerID=tZOtx3y1},
	author = {Garcia, X and Nagel, N and Zhang, F and Lee, B}
}
@article {Nagel2013,
	title = {{Coupled Numerical Evaluations of the Geomechanical Interactions Between a Hydraulic Fracture Stimulation and a Natural Fracture System in Shale Formations}},
	journal = {Rock Mechanics and Rock Engineering},
	volume = {46},
	number = {3},
	year = {2013},
	month = {mar},
	pages = {581{\textendash}609},
	abstract = {Due to the low permeability of many shale reservoirs, multi-stage hydraulic fracturing in horizontal wells is used to increase the productive, stimulated reservoir volume. However, each created hydraulic fracture alters the stress field around it, and subsequent fractures are affected by the stress field from previous fractures. The results of a numerical evaluation of the effect of stress field changes (stress shadowing), as a function of natural fracture and geomechanical properties, are presented, including a detailed evaluation of natural fracture shear failure (and, by analogy, the generated microseismicity) due to a created hydraulic fracture. The numerical simulations were performed using continuum and discrete element modeling approaches in both mechanical-only and fully coupled, hydro-mechanical modes. The results show the critical impacts that the stress field changes from a created hydraulic fracture have on the shear of the natural fracture system, which in-turn, significantly affects the success of the hydraulic fracture stimulation. Furthermore, the results provide important insight into: the role of completion design (stage spacing) and operational parameters (rate, viscosity, etc.) on the possibility of enhancing the stimulation of the natural fracture network ({\textquoteright}complexity{\textquoteright}); the mechanisms that generate the microseismicity that occurs during a hydraulic fracture stimulation; and the interpretation of the generated microseismicity in relation to the volume of stimulated reservoir formation. {\textcopyright} 2013 Springer-Verlag Wien.},
	keywords = {Discrete element modeling, Horizontal well, Hydraulic fracturing, Multi-stage fracturing, Natural fractures, Numerical simulation, Stimulation, Stimulation optimization, Well completion},
	issn = {0723-2632},
	doi = {10.1007/s00603-013-0391-x},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84877873776\&partnerID=tZOtx3y1},
	author = {Nagel, N. B. and Sanchez-Nagel, M. A. and Zhang, F. and Garcia, X. and Lee, B.}
}
@article {NEUKIRCH2013,
	title = {{NONSTATIONARY TIME SERIES CONVOLUTION: ON THE RELATION BETWEEN THE HILBERT{\textendash}HUANG AND FOURIER TRANSFORM}},
	journal = {Advances in Adaptive Data Analysis},
	volume = {05},
	number = {01},
	year = {2013},
	month = {jan},
	pages = {1350004},
	publisher = {World Scientific Publishing Company},
	abstract = {The Hilbert{\textendash}Huang Transform (HHT) decomposes time series into intrinsic mode functions (IMF) in time-frequency domain. We show that time slices of IMFs equal time slices of Fourier series, where the instantaneous parameters of the IMF define the parameters amplitude and phase of the Fourier series. This leads to the formulation of the theorem that nonstationary convolution of an IMF with a general time domain response function translates into a multiplication of the IMF with the respective spectral domain response function which is explicitly permitted to vary over time. We conclude and show on a real world application that a de-trended signal{\textquoteright}s IMFs can be convolved independently and then be used for further time-frequency analysis. Finally, a discussion is opened on parallels in HHT and the Fourier transform with respect to the time-frequency domain.},
	keywords = {convolution, Fourier transform, Hilbert{\textendash}Huang transform, nonstationary, Time series},
	issn = {1793-5369},
	doi = {10.1142/S1793536913500040},
	url = {http://www.worldscientific.com/doi/abs/10.1142/S1793536913500040},
	author = {NEUKIRCH, MAIK and Garcia, Xavier}
}
@article {E.Gracia2013,
	title = {{Preface: Marine and Lake Paleoseismology}},
	journal = {Natural Hazards and Earth System Science},
	volume = {13},
	number = {12},
	year = {2013},
	month = {dec},
	pages = {3469{\textendash}3478},
	abstract = {This special issue of Natural Hazards and Earth System Sciences (NHESS) contains 16 papers that resulted from the European Science Foundation (ESF) Research Conference "Submarine Paleoseismology: The Offshore Search of Large Holocene Earthquakes" that was held at the Universit{\"a}tszentrum Obergurgl (Austria), from 11 to 16 September 2010 (Pantosti et al., 2011). The conference enabled scientists from a number of existing lines of research to give an official start and international recognition to subaqueous paleoseismology. The scope of this Special Issue is built on the content of the ESF conference and includes different aspects of marine and lake paleoseismology. The 16 papers are separated into two main groups, namely, on-fault or off-fault paleoseismic studies. On-fault paleoseismology focuses on the observation, measurement and quantification of history of movements along the fault plane, where direct evidence of earthquake activity includes displacement of sediment strata and landforms such as seafloor scarps (Argnani et al., 2012; Beck et al., 2012; Gr{\`a}cia et al., 2012; Perea et al., 2012; Polonia et al., 2012). Off-fault paleoseismology uses the sedimentary record to identify deposits generated, directly or indirectly by seismic activity, such as mass-transport deposits, turbidites and tsunamites (Drab et al., 2012; Morey et al., 2013; Cattaneo et al., 2012; Gerardi et al., 2012; Goldfinger et al., 2013b; Langridge et al., 2012; Nelson et al., 2012; Patton et al., 2013; Pouderoux et al., 2012a; Smedile et al., 2012; Vacchi et al., 2012). {\textcopyright} 2013 Author(s).},
	issn = {1684-9981},
	doi = {10.5194/nhess-13-3469-2013},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84891048700\&partnerID=tZOtx3y1},
	author = {E. Gr{\`a}cia, E. and Lamarche, G. and Nelson, H. and Pantosti, D.}
}
@conference {Nagel2012a,
	title = {{Hydraulic fracturing optimization for unconventional reservoirs - The critical role of the mechanical properties of the natural fracture network}},
	booktitle = {Society of Petroleum Engineers - SPE Canadian Unconventional Resources Conference 2012, CURC 2012},
	volume = {1},
	year = {2012},
	pages = {227{\textendash}237},
	abstract = {The success of many shale plays depends on the optimal stimulation of natural fractures, and the characterization of the natural fracture systems is a key issue often leading to the construction of a discrete fracture network (DFN). The DFN chiefly consists of fracture spacing, fracture dip, and dip direction from numerous sources, and, in some cases, is matched to well test data allowing for the determination of hydraulic properties. However, a commonly missing component of natural fracture characterization, and the component most important to evaluating the coupled hydro-mechanical behavior of the fractures during a hydraulic fracture stimulation, is the evaluation of the mechanical behavior of the fractures. The important mechanical parameters of the fractures include: a) elastic properties such as shear and normal stiffness, which relate changes in pore pressure to changes in aperture; b) strength parameters such as cohesion and friction angle, which define when a fracture may shear and open; c) dilational properties, which relate fracture opening to shear slippage; d) fracture toughness, which determines the pressure required to extend a fracture; and e) initial aperture. In this paper, using a new, state-of-the-art, fully-coupled, 3D distinct element hydraulic fracturing simulator, mechanical fracture parameters were evaluated in a parametric study in order to determine their impact on the effectiveness of hydraulic fracture stimulations. Copyright 2012, Society of Petroleum Engineers.},
	isbn = {9781622764884},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84875645702\&partnerID=tZOtx3y1},
	author = {Nagel, Neal B. and Garcia, Xavier and Lee, Byungtark and Sanchez-Nagel, Marisela}
}
@conference {Nagel2012b,
	title = {{A numerical evaluation of the geomechanical interactions between a hydraulic fracture stimulation and a natural fracture system}},
	booktitle = {46th US Rock Mechanics / Geomechanics Symposium 2012},
	volume = {3},
	year = {2012},
	pages = {1882{\textendash}1898},
	abstract = {Due to the low permeability of many shale gas reservoirs, multi-stage hydraulic fracturing in horizontal wells is used to increase the stimulated volume. However, each created hydraulic fracture alters the stress field around it, and subsequent fractures are affected by the stress field from the previous fractures, which results in higher net pressures, smaller fracture widths, and diminished microseismic emissions. The results of a numerical evaluation of the effect of stress shadowing, as a function of natural fracture and geomechanical properties, are presented, including a detailed evaluation of natural fracture shear failure (and, by analogy, the microseismicity) due to a created hydraulic fracture using both continuum and discrete element modeling approaches. The results show the critical impact that a created hydraulic fracture has on the shear of the natural fracture system, which in-turn, significantly affects the success of the stimulation. Furthermore, the results provide important insight into the mechanisms that generate the microseismicity that occurs during a hydraulic fracture stimulation. Copyright 2012 ARMA, American Rock Mechanics Association.},
	isbn = {9781622765140},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84873277033\&partnerID=tZOtx3y1},
	author = {Nagel, N. B. and Sanchez-Nagel, M. A. and Garcia, X. and Lee, B.}
}
@article {Garcia-Mayordomo2012,
	title = {{The Quaternary Active Faults Database of Iberia (QAFI v.2.0)}},
	journal = {Journal of Iberian Geology},
	volume = {38},
	number = {1},
	year = {2012},
	month = {sep},
	pages = {301{\textendash}318},
	abstract = {The Quaternary Active Faults Database of Iberia (QAFI) is an initiative lead by the Institute of Geology and Mines of Spain (Instituto Geol{\'o}gico y Minero de Espa{\~n}a, IGME) for building a public repository of scientific data regarding faults having documented activity during the last 2.59 Ma (Quaternary). QAFI also addresses a need to transfer geologic knowledge to practitioners of seismic hazard and risk in Iberia by identifying and characterizing seismogenic fault-sources. QAFI is populated by the information freely provided by more than 40 Earth science researchers, storing to date a total of 262 records. In this article we describe the development and evolution of the database, as well as its internal architecture. Additionally, a first global analysis of the data is provided with a special focus on length and slip-rate fault parameters. Finally, the database completeness and the internal consistency of the data are discussed. Even though QAFI v.2.0 is the most current resource for calculating fault-related seismic hazard in Iberia, the database is still incomplete and requires further review.},
	keywords = {Active fault, Iberia, Portugal, Quaternary, Seismic hazard, Spain},
	issn = {1886-7995},
	doi = {10.5209/rev\_JIGE.2012.v38.n1.39219},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84861912592\&partnerID=tZOtx3y1},
	author = {Garc{\'\i}a-Mayordomo, J. and Insua-Ar{\'e}valo, J.M. and Mart{\'\i}nez-D{\'\i}az, J.J. and Jim{\'e}nez-D{\'\i}az, A. and Mart{\'\i}n-Banda, R. and Mart{\'\i}n-Alfageme, S. and {\'A}lvarez-G{\'o}mez, J.A. and Rodr{\'\i}guez-Peces, M. and P{\'e}rez-L{\'o}pez, R. and Rodr{\'\i}guez-Pascua, M.A. and Masana, E. and Perea, H. and Mart{\'\i}n-Gonz{\'a}lez, F. and Giner-Robles, J. and Nemser, E.S. and Cabral, J.}
}
@article {Rosas2012,
	title = {{Thrust{\textendash}wrench interference between major active faults in the Gulf of Cadiz (Africa{\textendash}Eurasia plate boundary, offshore SW Iberia): Tectonic implications from coupled analog and numerical modeling}},
	journal = {Tectonophysics},
	volume = {548-549},
	year = {2012},
	month = {jun},
	pages = {1{\textendash}21},
	abstract = {Analog and numerical modeling experiments were carried out to investigate the tectonic interference between intersecting major active strike-slip and thrust faults in the Gulf of Cadiz (Africa-Eurasia plate boundary, offshore SW Iberia). The obtained results show that newly mapped tectonic features located in the fault intersection area (corner zone) consist mostly in oblique (dextral-reverse) faults that accommodate significant strain partitioning. Modeling of this corner-zone faults show that they have endured some degree of rotation, displaying successive evolving geometries and kinematics. Numerical modeling results further show that an interbedded shallow soft layer, accounting for a regional (Late Miocene) gravitational "Chaotic" unit, could explain the mild bathymetric expression of the fault pattern in the corner-zone. Moreover, a recognized depth discrepancy, between the (upper crust) interference fault-pattern and the (lithospheric mantle) seismicity, is interpreted as a manifestation of similar thrust-wrench tectonic interference at different lithospheric depths. Accordingly, an intermediate lower crust-upper mantle aseismic (i.e. softened) depth-domain could be explained by pervasive alteration/serpentinization, prompted by fluid percolation through fault-related fractures associated with the newly revealed corner zone fault-network. Overall obtained results reinforce the relevance of a thrust-wrench multi-rupture seismic scenario as the main cause for the moderate seismicity (Mw < 6.0) in the study area. {\textcopyright} 2012 Elsevier B.V.},
	keywords = {Analog and numerical modeling, Fault interference, Gulf of Cadiz, Lithospheric mantle seismicity, Multi-rupture seismic hazards, Thrust-wrench tectonics},
	issn = {00401951},
	doi = {10.1016/j.tecto.2012.04.013},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84862115104\&partnerID=tZOtx3y1},
	author = {Rosas, F.M. and Duarte, J.C. and Neves, M.C. and Terrinha, P. and Silva, S. and Matias, L. and Gr{\`a}cia, E. and Bartolome, R.}
}
@booklet {Goldfinger,
	title = {{Turbidite Event History{\textemdash}Methods and Implications for Holocene Paleoseismicity of the Cascadia Subduction Zone}},
	year = {2012},
	publisher = {U. S. Geological Survey},
	abstract = {Appendices. {\textendash} 170 pages, 64 figures, 13 tables.},
	url = {http://digital.csic.es/handle/10261/66386},
	author = {Goldfinger, Chris and Nelson, C. Hans and Morey, Ann E. and Johnson, Joel E. and Patton, Jason and Karabanov, Eugene and Guti{\'e}rrez-Pastor, Julia and Eriksson, Andrew T. and Gr{\'a}cia, Eul{\`a}lia and Dunhill, Gita and Enkin, Randolph J. and Dallimore, Audrey and Vallier, Tracy}
}
@conference {Nagel2012,
	title = {{Understanding "SRV": A numerical investigation of "wet" vs. "dry" microseismicity during hydraulic fracturing}},
	booktitle = {Proceedings - SPE Annual Technical Conference and Exhibition},
	volume = {4},
	year = {2012},
	pages = {3375{\textendash}3386},
	abstract = {Effective monitoring of hydraulic fracturing stimulations is critical to their optimization, and the evaluation of field microseismic data is now commonly used in many of the active shale plays for this purpose. The concept of Stimulated Reservoir Volume (SRV), for example, is a common technique wherein the extent of the microseismic data is used to represent the size of the fluid drainage area for a fracture or well. A principal challenge with the interpretation of microseismic data - and its use to determine drainage area or some other metric for the success of the stimulation - is the understanding of the actual cause of the microseismicity itself. Basic geomechanics principles show that rock failure - the cause of microseismicity - is a result of changes in the in-situ effective stresses relative to a given rock strength. Effective stress - which is the stress acting on the rock matrix - may change either through a change in pore pressure (leading to {\textquoteright}wet{\textquoteright} microseismicity) or through a change in the total stress (leading to {\textquoteright}dry{\textquoteright} microseismicity). Dry microseismicity may occur well beyond the pressure field and be hydraulically disconnected from the wellbore. In this paper, we present the results of a numerical study of hydraulic fracturing-induced microseismicity using a discrete element code, where the mechanical behavior of the natural fractures is modeled explicitly, which allows for the quantitative evaluation of {\textquoteright}wet{\textquoteright} versus {\textquoteright}dry{\textquoteright} microseismicity. Copyright 2012, Society of Petroleum Engineers.},
	isbn = {9781622764150},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84874038119\&partnerID=tZOtx3y1},
	author = {Nagel, Neal B. and Garcia, Xavier and Nagel, Marisela Sanchez and Lee, Byungtark}
}
@conference {Nagel2011,
	title = {{Discrete element hydraulic fracture modeling - Evaluating changes in natural fracture aperture and transmissivity}},
	booktitle = {Society of Petroleum Engineers - Canadian Unconventional Resources Conference 2011, CURC 2011},
	volume = {2},
	year = {2011},
	pages = {1350{\textendash}1363},
	abstract = {Previous works have presented the results of successful simulations of fluid injection into naturally fractured shale using a Discrete Element Model (DEM). The simulations included coupled fluid flow-deformation analysis, failure type and extent calculations, as well as a series of parametric analyses. The parameters investigated included: 1) injection rate and its effect on the overall fracturing results, and 2) fluid viscosity, which had a significant influence on the ratio of tensile (mode 1) failure versus shear failure. With the huge growth in the stimulation of naturally fractured formations such as fractured shales, it is clear that the industry needs new hydraulic fracturing simulation tools beyond the limits imposed by pseudo3D fracturing models. DEMs, in which both matrix block behavior and fracture behavior are explicitly modeled, offer one option for the specific modeling of hydraulic fracture creation and growth in a naturally fractured formation without, for example, the assumption of bi-planar fracture growth. In this paper, we extend the previous works to quantify, for fractured shale gas plays, the effect of stress orientation, fluid viscosity, and rock mechanical properties in terms of changes in fracture aperture and transmissivity. Changes in fracture transmissivity directly correlate with improvements in well productivity - the primary goal of the stimulation. The results of the study provide a means to improve shale completions by understanding the effects of the DFN orientation relative to the stress field, fluid viscosity, and rock mechanical properties on changes in fracture aperture, fracture transmissivity, and formation effective permeability, which directly relate to well productivity. Copyright 2011, Society of Petroleum Engineers.},
	isbn = {9781618394217},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84860594665\&partnerID=tZOtx3y1},
	author = {Nagel, Neal and Damjanac, Branko and Garcia, Xavier and Sanchez-Nagel, Marisela}
}
@article {Nemser,
	title = {{Compilation of parameterized seismogenic sources in Iberia for the SHARE European-scale seismic source model.}},
	year = {2010},
	pages = {201{\textendash}204},
	keywords = {Database, Fault, Seismogenic, SHARE},
	isbn = {978-84-693-6088-0},
	url = {https://dspace.uevora.pt/rdpc/handle/10174/6247},
	author = {Nemser, E.S. and Garc{\'\i}a-Mayordomo, J. and Cabral, J. and Fonseca, J. and Mart{\'\i}nez-D{\'\i}az, J.J. and Alfaro Garc{\'\i}a, P. and {\`A}lvarez G{\'o}mez, J.A. and Atakan, K. and Aza{\~n}{\'o}n Hern{\'a}ndez, J.M. and Basili, R. and Besana-Ostman, G.M. and Bezzeghoud, M. and Borges, J.F. and Brum da Silveira, A. and Carlos Lopes, F. and Carvalho, J. and Dias, R.P. and Figueiredo, P.M. and Garc{\'\i}a Fern{\'a}ndez, M. and Giner Robles, J. and Gonzalez, A. and Gr{\`a}cia, E. and Gutierrez, F. and Insua Ar{\'e}valo, J.M. and Jim{\'e}nez, M.J. and Jim{\'e}nez-D{\'\i}az, A. and Lafuente Tom{\'a}s, P. and Lucha, P. and Madeira, J. and Martin Gonz{\'a}lez, F. and Masana, E. and Matias, L. and Moreno, X. and Ortu{\~n}o, M. and Perea, H. and P{\'e}rez L{\'o}pez, R. and Rodr{\'\i}guez Pascua, M.A. and Ruano, P. and Santanach, P. and Sanz de Galdeano, C. and Silva Barroso, P. and Silva, S. and Sim{\'o}n, J.L. and Terrinha, P. and Vilanova, S. and Villamor, P. and Wong, J.}
}
@article {Harris2010a,
	title = {{Thermal regime of the Costa Rican convergent margin: 1. Along-strike variations in heat flow from probe measurements and estimated from bottom-simulating reflectors}},
	journal = {Geochemistry, Geophysics, Geosystems},
	volume = {11},
	number = {12},
	year = {2010},
	month = {dec},
	pages = {n/a{\textendash}n/a},
	abstract = {The thermal structure of convergent margins provides information related to the tectonics, geodynamics, metamorphism, and fluid flow of active plate boundaries. We report 176 heat flow measurements made with a violin bow style probe across the Costa Rican margin at the Middle America Trench. The probe measurements are collocated with seismic reflection lines. These seismic reflection lines show widespread distribution of bottom-simulating reflectors (BSRs). To extend the spatial coverage of heat flow measurements we estimate heat flow from the depth of BSRs. Comparisons between probe measurements and BSR-derived estimates of heat flow are generally within 10\% and improve with distance landward of the deformation front. Together, these determinations provide new information on the thermal regime of this margin. Consistent with previous studies, the margin associated with the northern Nicoya Peninsula is remarkably cool. We define better the southern boundary of the cool region. The northern extent of the cool region remains poorly determined. A regional trend of decreasing heat flow landward of the deformation front is apparent, consistent with the downward advection of heat by the subducting Cocos Plate. High wave number variability at a scale of 5-10 km is significantly greater than the measurement uncertainty and is greater south of the northern Nicoya Peninsula. These heat flow anomalies vary between approximately 20 and 60 mW m-2 and are most likely due to localized fluid flow through mounds and faults on the margin. Simple one-dimensional models show that these anomalies are consistent with flow rates of 7-15 mm yr-1. Across the margin toe variability is significant and likely due to fluid flow through deformation structures associated with the frontal sedimentary prism. Copyright 2010 by the American Geophysical Union.},
	keywords = {fluid flow, heat flow, Middle America Trench, subduction zones},
	issn = {15252027},
	doi = {10.1029/2010GC003272},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-78650544794\&partnerID=tZOtx3y1},
	author = {Harris, Robert N. and Grevemeyer, Ingo and Ranero, Cesar R. and Villinger, Heinrich and Barckhausen, Udo and Henke, Thomas and Mueller, Christian and Neben, Soenke}
}
@article {Jones2009,
	title = {{Area selection for diamonds using magnetotellurics: Examples from southern Africa}},
	journal = {Lithos},
	volume = {112},
	year = {2009},
	month = {nov},
	pages = {83{\textendash}92},
	abstract = {Southern Africa, particularly the Kaapvaal Craton, is one of the world{\textquoteright}s best natural laboratories for studying the lithospheric mantle given the wealth of xenolith and seismic data that exist for it. The Southern African Magnetotelluric Experiment (SAMTEX) was launched to complement these databases and provide further constraints on physical parameters and conditions by obtaining information about electrical conductivity variations laterally and with depth. Initially it was planned to acquire magnetotelluric data on profiles spatially coincident with the Kaapvaal Seismic Experiment, however with the addition of seven more partners to the original four through the course of the experiment, SAMTEX was enlarged from two to four phases of acquisition, and extended to cover much of Botswana and Namibia. The complete SAMTEX dataset now comprises MT data from over 730 distinct locations in an area of over one million square kilometres, making SAMTEX the largest regional-scale MT experiment conducted to date. Preliminary images of electrical resistivity and electrical resistivity anisotropy at 100 km and 200 km, constructed through approximate one-dimensional methods, map resistive regions spatially correlated with the Kaapvaal, Zimbabwe and Angola Cratons, and more conductive regions spatially associated with the neighbouring mobile belts and the Rehoboth Terrane. Known diamondiferous kimberlites occur primarily on the boundaries between the resistive or isotropic regions and conductive or anisotropic regions. Comparisons between the resistivity image maps and seismic velocities from models constructed through surface wave and body wave tomography show spatial correlations between high velocity regions that are resistive, and low velocity regions that are conductive. In particular, the electrical resistivity of the sub-continental lithospheric mantle of the Kaapvaal Craton is determined by its bulk parameters, so is controlled by a bulk matrix property, namely temperature, and to a lesser degree by iron content and composition, and is not controlled by contributions from interconnected conducting minor phases, such as graphite, sulphides, iron oxides, hydrous minerals, etc. This makes quantitative correlations between velocity and resistivity valid, and a robust regression between the two gives an approximate relationship of Vs [m/s] = 0.045 * log(resistivity [ohm m]) + 4.5. {\textcopyright} 2009.},
	keywords = {Cratonic lithosphere, Diamond exploration, Electrical conductivity, Kaapvaal Craton, Sub-continental lithospheric mantle, Zimbabwe Craton},
	issn = {00244937},
	doi = {10.1016/j.lithos.2009.06.011},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-72149117671\&partnerID=tZOtx3y1},
	author = {Jones, Alan G. and Evans, Rob L. and Muller, Mark R. and Hamilton, Mark P. and Miensopust, Marion P. and Garcia, Xavier and Cole, Patrick and Ngwisanyi, Tiyapo and Hutchins, David and Fourie, C.J.S. and Jelsma, Hielke and Evans, Shane and Aravanis, Theo and Pettit, Wayne and Webb, Sue and Wasborg, Jan}
}
@article {TRIGO-RODRIGUEZ2009,
	title = {{The Cali meteorite fall: A new H/L ordinary chondrite}},
	journal = {Meteoritics \& Planetary Science},
	volume = {44},
	number = {2},
	year = {2009},
	month = {feb},
	pages = {211{\textendash}220},
	abstract = {The fall of the Cali meteorite took place on 6 July 2007 at 16 h 32 {\textpm} 1 min local time (21 h 32 {\textpm} 1 min UTC). A daylight fireball was witnessed by hundreds of people in the Cauca Valley in Colombia from which 10 meteorite samples with a total mass of 478 g were recovered near 3{\textdegree}24.3{\textquoteright}N, 76{\textdegree}30.6{\textquoteright}W. The fireball trajectory and radiant have been reconstructed with moderate accuracy. From the computed radiant and from considering various plausible velocities, we obtained a range of orbital solutions that suggest that the Cali progenitor meteoroid probably originated in the main asteroid belt. Based on petrography, mineral chemistry, magnetic susceptibility, fhermoluminescence, and bulk chemistry, the Cali meteorite is classified as an H/L4 ordinary chondrite breccia.},
	issn = {10869379},
	doi = {10.1111/j.1945-5100.2009.tb00729.x},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-65949113395\&partnerID=tZOtx3y1},
	author = {TRIGO-RODR{\'I}GUEZ, Josep M. and LLORCA, Jordi and RUBIN, Alan E. and GROSSMAN, Jeffrey N. and SEARS, Derek W. G. and NARANJO, Mateo and BRETZIUS, Stacy and TAPIA, Mar and SEP{\'U}LVEDA, Marino H. GUAR{\'I}N}
}
@article {Gutierrez-PastorJ.NelsonC.H.GoldfingerC.JohnsonJ.E.EscutiaC.ErikssonA.T.MoreyA.E.\&ShipboardScientificPartyamongthemGracia2009,
	title = {{Earthquake Holocene turbidite frequency confirmed by hemipelagic sedimentation on the Cascadia and Northen California active tectonic continental margins}},
	journal = {Society for Sedimentary Geology},
	year = {2009},
	pages = {20},
	keywords = {92, C., C.H., Goldfinger, Guti{\'e}rrez-Pastor, J., Nelson, Society for Sedimentary Geology, Sp. Pub.},
	isbn = {978-1-56576-136-0.},
	url = {http://www.activetectonics.oce.orst.edu/paper\_files/Gutierrez-Pastor et al,2009.pdf},
	author = {Gutierrez-Pastor, J. and Nelson, C.H. and Goldfinger, C. and Johnson, J.E. and Escutia, C. and Eriksson, A.T. and Morey, A.E. and Shipboard Scientific Party (among them Gr{\`a}cia, E.)}
}
@article {Buske2009,
	title = {{Imaging and inversion {\textemdash} Introduction}},
	journal = {GEOPHYSICS},
	volume = {74},
	number = {6},
	year = {2009},
	month = {nov},
	pages = {WCA1{\textendash}WCA4},
	issn = {0016-8033},
	doi = {10.1190/1.3256872},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84861190134\&partnerID=tZOtx3y1},
	author = {Buske, Stefan and Lecomte, Isabelle and Nemeth, Tamas and Operto, St{\'e}phane and Sallares, Valenti}
}
@article {Muller2009,
	title = {{Lithospheric structure, evolution and diamond prospectivity of the Rehoboth Terrane and western Kaapvaal Craton, southern Africa: Constraints from broadband magnetotellurics}},
	journal = {Lithos},
	volume = {112},
	year = {2009},
	month = {nov},
	pages = {93{\textendash}105},
	abstract = {A 1400~km-long, 2-D magnetotelluric (MT) profile, consisting of 69 sites at 20~km intervals, across the western part of the Archaean Kaapvaal Craton, the Proterozoic Rehoboth Terrane and the Late Proterozoic/Early Phanerozoic Ghanzi-Chobe/Damara Belt reveals significant lateral heterogeneity in the electrical resistivity structure of the southern African lithosphere. The lithospheric structures of the Rehoboth Terrane and Ghanzi-Chobe/Damara Belt have not been imaged previously by geophysical methods. Temperature is the primary control on the resistivity of mantle minerals, and the MT derived lithospheric thicknesses therefore provide a very reasonable proxy for the "thermal" thickness of the lithosphere (i.e., the thickness defined by the intersection of a conductive geotherm with the mantle adiabat), allowing approximate present-day geotherms to be calculated. The work indicates the following present-day average lithospheric thicknesses, to a precision of about {\textpm} 20~km, for each of the terranes traversed (inferred geotherms in brackets): Eastern Kimberley Block of the Kaapvaal Craton 220~km (41~mW m- 2), Western Kimberley Block 190~km (44~mW m- 2), Rehoboth Terrane 180~km (45~mW m- 2) and Ghanzi-Chobe/Damara Belt 160~km (48~mW m- 2). A clear relationship between the electrical resistivity structure of the lithosphere and the tectonic stabilisation-age of the terrane is evident. Good agreement between the inferred present-day lithospheric geotherms and surface heat flow measurements indicate the latter are strongly controlled by variations in lithospheric thickness. A significant difference in lithospheric thickness is observed between the Eastern and Western Kimberley blocks, and is consistent with previous seismic tomography images of the Kaapvaal Craton. The present-day lithospheric thickness, and reduced depth extent into the diamond stability field, accounts for the absence of diamondiferous kimberlites in the Gibeon and Gordonia kimberlite fields in the Rehoboth Terrane. Previously published mantle xenolith P-T arrays from the Gibeon, Gordonia and Kimberley fields, however, suggest that the Rehoboth Terrane had equilibrated to a cooler conductive palaeo-geotherm (40-42~mW m- 2 ), very similar to that of Eastern Kimberley Block of the Kaapvaal Craton, at some time prior to the Mesozoic eruption of the kimberlites. The timing and nature of both the thermal equilibration of the Rehoboth Terrane, and the subsequent lithospheric heating/thinning event required to account for its present-day lithospheric structure, are not well constrained. A model consisting of the penetration of heat transporting magmas into the lithosphere, with associated chemical refertilisation, at an early stage of Mesozoic thermalism appears to be the most plausible model at present to account for both the present-day lithospheric structure of the Rehoboth Terrane and an earlier, cooler palaeo-geotherm. Some problems, however, remain unresolved in terms of the isostatic response of the model. Based on a compilation of xenocryst Cr/Ca-in-pyrope barometry observations, the extent of depleted mantle in the Rehoboth Terrane is found to be significantly reduced with respect to the Eastern Kimberley Block: 117~km versus 138-167~km. It appears most likely that the depletion depth in both terranes, at least in the vicinity of kimberlite eruption, is explained by refertilisation of the lower lithospheric mantle. {\textcopyright} 2009.},
	keywords = {Diamond, Geotherm, Lithosphere, Magnetotellurics, Southern Africa, Xenolith},
	issn = {00244937},
	doi = {10.1016/j.lithos.2009.06.023},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-72049130282\&partnerID=tZOtx3y1},
	author = {Muller, M.R. and Jones, A.G. and Evans, R.L. and Gr{\"u}tter, H.S. and Hatton, C. and Garcia, X. and Hamilton, M.P. and Miensopust, M.P. and Cole, P. and Ngwisanyi, T. and Hutchins, D. and Fourie, C.J. and Jelsma, H.A. and Evans, S.F. and Aravanis, T. and Pettit, W. and Webb, S.J. and Wasborg, J.}
}
@article {Goldfinger2008,
	title = {{Late Holocene Rupture of the Northern San Andreas Fault and Possible Stress Linkage to the Cascadia Subduction Zone}},
	journal = {Bulletin of the Seismological Society of America},
	volume = {98},
	number = {2},
	year = {2008},
	month = {apr},
	pages = {861{\textendash}889},
	abstract = {We relate the late Holocene northern San Adreas fault (NSAF) paleoseismic history developed using marine sediment cores along the northern California continental margin to a similar dataset of cores collected along the Cascadia margin, including channels from Barclay Canyon off Vancouver Island to just north of Monterey Bay. Stratigraphic correlation and evidence of synchronous triggering imply earthquake origin, and both temporal records are compatible with onshore paleoseismic data. In order to make comparisons between the temporal earthquake records from the NSAF and Cascadia, we refine correlations of southern Cascadia great earthquakes, including the land paleoseismic record. Along the NSAF during the last \~{}2800 yr, 15 turbidites, including one likely from the great 1906 earthquake, establish an average repeat time of \~{}200 yr, similar to the onshore value of \~{}240 yr. The combined land and marine paleoseismic record from the southern Cascadia subduction zone includes a similar number of events during the same period. While the average recurrence interval for full-margin Cascadia events is \~{}520 yr, the southern Cascadia margin has a repeat time of \~{}220 yr, similar to that of the NSAF. Thirteen of the 15 NSAF events were preceded by Cascadia events by \~{}0-80 yr, averaging 25-45 yr (as compared to \~{}80-400 yr by which Cascadia events follow the NSAF). Based on the temporal association, we model the coseismic and cumulative postseismic deformation from great Cascadia megathrust events and compute related stress changes along the NSAF in order to test the possibility that Cascadia earthquakes triggered the penultimate, and perhaps other, NSAF events. The Coulomb failure stress (CFS) resulting from viscous deformation related to a Cascadia earthquake over \~{}60 yr does not contribute significantly to the total CFS on the NSAF. However, the coseismic deformation increases CFS on the northern San Andreas fault (NSAF) by up to about 9 bars offshore of Point Delgada, most likely enough to trigger that fault to fail in north-to-south propagating ruptures.},
	issn = {0037-1106},
	doi = {10.1785/0120060411},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-42649087275\&partnerID=tZOtx3y1},
	author = {Goldfinger, C. and Grijalva, K. and Burgmann, R. and Morey, A. E. and Johnson, J. E. and Nelson, C. H. and Gutierrez-Pastor, J. and Ericsson, A. and Karabanov, E. and Chaytor, J. D. and Patton, J. and Gr{\`a}cia, E.}
}
@article {Goldfinger2007,
	title = {{Rupture lengths and temporal history of significant earthquakes on the offshore and north coast segments of the Northern San Andreas Fault based on turbidite stratigraphy}},
	journal = {Earth and Planetary Science Letters},
	volume = {254},
	number = {1-2},
	year = {2007},
	pages = {9{\textendash}27},
	abstract = {74 piston, gravity and jumbo Kasten cores were collected from channel and canyon systems draining the northern California continental margin to investigate the record of periodic Holocene turbidites for possible connection to large magnitude earthquakes on the adjacent Northern San Andreas Fault. Poorly known channel systems were mapped with multibeam sonar to define pathways and channel confluences. Cores sampled all major and many minor channel systems extending from Cape Mendocino to just north of Monterey Bay. Sampling both along and across channels was done and particular attention was paid to channel confluences, as these areas afford opportunities to test for synchronous triggering of turbidity currents. While at sea, all cores were scanned using a GEOTEK multisensor core logger (MSCL), which collects high-resolution photography, P-wave velocity, gamma-ray density, and magnetic susceptibility data from the unsplit cores. Lithology was logged visually, and cores were later imaged with X-radiography. We use 14C ages, relative dating tests at channel confluences, and stratigraphic correlation using physical properties to determine whether turbidites deposited in separate channel systems are correlative, implying they were triggered by a common event. These tests can, in most cases, separate earthquake-triggered turbidity currents from other possible sources. The late Holocene turbidite record off northern California passes these tests for synchronous triggering, and can be correlated with multiple proxies from site to site between Noyo Channel and the latitude of San Francisco. Preliminary comparisons of our event ages with existing and in progress work at onshore coastal sites show good correlation, further circumstantial evidence that the offshore record is primarily earthquake generated. During the last \~{} 2800~yr, 15 turbidites are recognized, including the great 1906 earthquake. Their chronology establishes an average repeat time of \~{} 200~yr, similar to the onshore value of \~{} 230~yr. Along-strike correlation suggests that at least 8 of the youngest 10 of these events ruptured the 320~km distance from the Mendocino Triple Junction to near San Francisco. {\textcopyright} 2006.},
	keywords = {Northern San Andreas Fault, Paleoseismology, Turbidite},
	issn = {0012821X},
	doi = {10.1016/j.epsl.2006.11.017},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-33846271439\&partnerID=tZOtx3y1},
	author = {Goldfinger, Chris and Morey, Ann E. and Nelson, C. Hans and Guti{\'e}rrez-Pastor, Julia and Johnson, Joel E. and Karabanov, Eugene and Chaytor, Jason and Eriksson, Andrew}
}
